4055902037 Genuine Water Inlet Valve Assembly for Electrolux Group Dishwashers, Replacement Fill Solenoid Valve

Part 4055902037 is a genuine Electrolux water inlet valve assembly for Electrolux group dishwashers. The inlet valve opens on a signal from the control to let water in, then shuts off tightly when the fill is complete. Valves vary in coil type, outlet shape and hose fittings, so check the number on your old valve or in your model's parts list before ordering 4055902037.

Dishwasher not filling or overfilling

An inlet valve has an electric coil that pulls a plunger to open the water path. When the coil burns out, the dishwasher won't fill and usually flashes a water supply fault. Grit and scale can stop the valve closing fully, which leads to water trickling in while the machine is off, overfilling, or water appearing on the floor. A partly blocked inlet screen gives a slow fill and poor wash results. Measuring the coil resistance and checking the screen will tell you whether the valve is the cause.

Part details

• Genuine Electrolux part 4055902037
• Water inlet valve assembly
• Controls the water entering the dishwasher
• Compare fittings and connector with your old valve

Changing the inlet valve

Turn off the tap and unplug the dishwasher before you start, and keep a towel handy for water in the hose. Photograph the wiring and hose routing before anything comes off. Fit any hose clamps securely, reconnect the supply and open the tap slowly while watching for drips. Run a short program and check the machine fills, then stops, without any leaks.

Questions about this part

My dishwasher shows a no water fault. Is it the inlet valve?

It can be, but first check the tap is fully open, the inlet hose isn't kinked and the filter screen where the hose connects isn't blocked. If the supply is fine, test the valve coil with a multimeter before ordering.