4055775102 Genuine RG66A2/BGEF Remote Control for Electrolux Group Air Conditioners, Replacement Air Con Handset

Remote lost behind the couch for good, or stopped working after a fall? 4055775102 is the genuine Electrolux replacement handset with the code RG66A2/BGEF, made for Electrolux group air conditioners. That code is normally printed on the back of the remote or inside the battery cover, so it's the quickest way to confirm a match. Universal remotes may not control every mode, so matching the original handset code is the safer choice.

Air conditioner remote not working? Check these first

The handset sends infrared signals to a receiver on the indoor unit to set mode, temperature, fan speed and timers. Before buying a new one, fit fresh batteries, clean any corrosion off the terminals and check the display comes on. You can test the infrared beam by pointing the remote at a phone camera and pressing a button, as many phone cameras show the flashing light. If the screen stays blank with new batteries, buttons are worn through, or the case is cracked, a replacement handset is the answer. If the remote works but the unit ignores it, the receiver may be at fault instead.

Part details

• Genuine Electrolux part 4055775102
• Handset code RG66A2/BGEF
• Infrared remote for Electrolux group air conditioners
• Match the code on the back of your old remote

Setting up the new remote

Fit new batteries, following the polarity marks inside the cover. Check the mode and temperature shown on the display, then point the remote at the indoor unit from a normal distance and press the power button. Most units beep when they accept a command. Some handsets need the clock and timer set again after the batteries go in, so run through those settings before you put the remote away.

Questions about this part

Where do I find the code on my old remote?

Look on the back of the handset and inside the battery compartment for a printed code. If it reads RG66A2/BGEF, this is the matching genuine remote. If the code is different or worn off, send your air conditioner's model number through our parts enquiry form.

Will it work with any air conditioner?

No. It's made for Electrolux group units that use the RG66A2/BGEF handset. Other brands use different signal codes, so match the code on your old remote or the model of your indoor unit before ordering.