4055699435 Genuine Water Inlet Safety Hose for Electrolux Group Dishwashers, TP Safety Hose

Part 4055699435 is a genuine Electrolux group safety hose, the water inlet hose that connects a dishwasher to the tap. Safety hoses are designed with added leak protection compared with a plain inlet hose. If yours is leaking, split, kinked or damaged, replace it rather than trying to patch it. Check your old hose or parts list for 4055699435 so you get the right one.

Leaking or damaged dishwasher inlet hose

The inlet hose runs from the water tap to the dishwasher's inlet valve and sits under mains pressure whenever the tap is on. A safety hose adds protection so a failure is less likely to flood the kitchen. Replace it if you see drips at either end, water marks on the floor or cabinet, a swollen or split section, a crushed hose behind the machine, or a damaged fitting. A hose that was pinched during installation can also starve the dishwasher of water, causing slow fills or error codes.

Part details

• Genuine Electrolux group part 4055699435
• Safety type water inlet hose
• For Electrolux group dishwashers

Fitting the new safety hose

Turn off the water tap and switch the dishwasher off at the wall. Ease the machine out, catching water in a tray as you undo the old hose. Some safety hoses connect into the dishwasher's wiring as well as the plumbing, so photograph everything before disconnecting. Fit the new hose without kinks, open the tap slowly and check both ends for leaks.

Questions about this part

Will a standard inlet hose do the same job?

Not if your dishwasher was built with a safety hose. Some safety hoses link into the machine's leak protection, so fitting the genuine 4055699435 keeps that protection working as intended. Check your parts list to confirm.