4055562708 Genuine Black Pan Head Screw #10-16 x 5/8 Inch, PH2 Phillips Drive, for Electrolux Group Appliances

This genuine Electrolux screw, part 4055562708, is a black pan head fastener sized #10-16 x 5/8 inch with a PH2 Phillips drive. Electrolux uses specific screws in specific spots, so ordering by number avoids the guesswork of a hardware store substitute. It's listed for Electrolux group appliances, and the black finish helps it blend in where a fixing is on show.

Choosing the right replacement screw for your appliance

The size #10-16 x 5/8 means a number 10 gauge screw with 16 threads per inch and a length of 5/8 of an inch, roughly 16mm. The pan head sits proud of the surface with a flat top and rounded edges, and PH2 is the common medium Phillips screwdriver size. The wrong screw can strip the hole, crack plastic, or leave a panel loose and rattling, and one that's too long can foul parts behind the panel. Matching the original keeps panels and brackets fixed the way the factory intended.

Part details

• Genuine Electrolux part 4055562708
• Size #10-16 x 5/8 inch
• Pan head with PH2 Phillips drive
• Black finish
• Listed for Electrolux group appliances

Fitting tips for appliance screws

Isolate the appliance at the wall before opening any panel. Use a PH2 screwdriver that fits snugly, as a worn or undersized bit will chew the head. Start the screw by hand to find the existing thread, then drive it until it's snug. Stop as soon as it pulls the part tight, especially in plastic or thin sheet metal, because over tightening strips the hole.

Questions about this part

Can I use a hardware store screw instead?

A screw with the same gauge, thread, length and head may work, but thread type and finish matter in appliances. Ordering 4055562708 gives you the screw Electrolux specifies, so it matches the original fixing.