4055552493 Genuine Terminal Board Assembly for Electrolux Group Appliances, Wiring Connection Block

Electrolux part 4055552493 is a genuine terminal board assembly. A terminal board is the block where wires are joined and clamped, often where the supply cable meets the appliance's internal wiring. No model list is published for this number, so check that your appliance's parts list shows 4055552493 before ordering, or compare it closely with the board you're replacing.

Burnt or loose terminal board? Why it matters

Every connection on a terminal board carries current, and in heating appliances that can be a lot of it. If a screw works loose or a terminal corrodes, resistance builds and the joint heats up. The signs are scorch marks or melted plastic around the board, a burning smell, an appliance that cuts out or loses a function now and then, or a circuit that trips. Once the board itself is cracked or discoloured, tightening the screws isn't enough, and the whole assembly should be replaced. Check the cable ends too, as heat damage often travels into the wiring.

Part details

• Genuine Electrolux part 4055552493
• Terminal board supplied as an assembly
• Replace if burnt, cracked or heat damaged
• Installation by a licensed electrician

Fitting a terminal board

Terminal boards carry mains power, so this is work for a licensed electrician, and hard-wired appliances must be isolated at the switchboard. Photograph the wiring and label each lead before removing the old board. Trim back any heat damaged wire, tighten each terminal firmly, refit any cable clamp and earth, then test before the appliance goes back into use.

Questions about this part

How do I know this terminal board suits my appliance?

There's no published model list for 4055552493. Find your model number on the appliance's rating plate, then check the parts list for that model. If it shows this number, it's the right board.