4055529079 Genuine Gas Tap with By-Pass 82/60 H=57.7 M46 for Electrolux Group Gas Cooktops, Burner Gas Valve Replacement

Genuine Electrolux part 4055529079 is a gas tap with a by-pass marked 82/60, plus the markings H=57.7 and M46. The gas tap is the valve behind each control knob that sets how much gas reaches the burner. Its by-pass controls the flow on the lowest setting, so the 82/60 marking matters when matching a replacement. A similar tap marked 60/27 is a separate part, so compare every marking on your old tap first.

Gas cooktop knob stiff or burner flame wrong

Every time you turn a knob, the gas tap opens and feeds a controlled flow of gas to its burner. Many taps also include a flame failure valve, which works with the thermocouple to cut the gas if the flame goes out. A failing tap can make the knob stiff or loose, give a flame that won't turn down, or cause a gas smell around the knob. If you smell gas, turn the cooktop off at the gas isolation valve, ventilate the room and call a licensed gas fitter.

Part details

• Genuine Electrolux part 4055529079
• Gas tap with by-pass, marked 82/60
• Also marked H=57.7 and M46
• Model fit not on file, compare markings with your old tap
• Installation by a licensed gas fitter required

Gas tap replacement is a job for a gas fitter

In Australia, gas taps must be replaced by a licensed gas fitter. They will shut off the gas supply, isolate power to the ignition, swap the tap, set the minimum flame and leak test the connections before handing the cooktop back. You can help by having the cooktop model number and the markings from the old tap ready.

Questions about this part

What do the 82/60 and H=57.7 markings mean?

They are factory markings used to tell similar gas taps apart. Taps that look alike can carry different markings, so match every one, along with the part number, before ordering. Your licensed gas fitter can confirm the match.