4055432969 Genuine Rangehood Lamp Holder for Electrolux Group Rangehoods, Replacement Light Globe Socket

If your rangehood light won't work even with a new globe, the holder may be to blame. Part 4055432969 is a genuine Electrolux lamp holder for Electrolux group rangehoods, the socket the globe fits into. We don't have a model list for it, so compare it with the old holder and confirm the part number from your rangehood's parts diagram before you order.

Rangehood light not working after a globe change?

The lamp holder connects the globe to the rangehood's wiring and holds it in place over the cooktop. It lives in a hot, greasy spot, so over time the plastic can go brittle, the contacts can scorch or lose their spring, and the holder can crack when a stuck globe is forced out. Common signs are a light that flickers, works only when the globe is pushed or wiggled, or stays dead after a new globe goes in. Melting or brown marks around the socket mean it should be replaced before the light is used again.

Part details

• Genuine Electrolux part number 4055432969
• Lamp holder (globe socket) for the rangehood light
• For Electrolux group rangehoods

Replacing the lamp holder

Switch the rangehood off at the wall, or at the switchboard if it's hard-wired, and let the globe cool. Remove the filters to reach the light housing. Take a photo of the wires on the old holder before unclipping them, then connect the new holder the same way. Hard-wired rangehoods should be done by a licensed electrician. Fit a globe of the correct type and rating.

Questions about this part

Is the holder or the globe the problem?

Try a new globe of the correct type first. If the light still doesn't work, or the old globe shows scorching at its base, the holder is the likely fault. Visible melting or discolouring around the socket is a clear sign it needs replacing.