4055192688 Genuine Indoor Display Board for Electrolux Group Split System Air Conditioners, Cross Reference 30565164

Genuine Electrolux part 4055192688 is the display board for the indoor unit of Electrolux group split system air conditioners, cross referenced to 30565164. It's the small board behind the front panel that lights the temperature readout and status lights. On many split systems it also carries the receiver that picks up the remote control signal. Match either number to your old board before ordering.

Split system display blank or ignoring the remote?

The indoor display board shows what the unit is doing, and on many models it's also how the unit hears the remote. When it fails you may see a blank or partly lit display, flickering digits, or no beep when you press the remote, even though the unit might still run from its manual button. Moisture, insects and power surges are common causes. A faulty main control board or a loose cable between the boards can look the same, so check connections before replacing the display.

Part details

• Genuine Electrolux part 4055192688
• Cross reference 30565164
• Indoor unit display board
• For Electrolux group split system air conditioners, model fit not on file

Replacing the display board

Isolate the air conditioner at its circuit breaker or isolator, and have a licensed electrician or qualified air conditioning technician carry out the work, as split systems are usually hard-wired. Lift the front panel, unclip the display board housing and unplug its cable. Fit the new board, route the cable clear of moving parts, then restore power and test the display and remote.

Questions about this part

Where's the model number on my split system?

Look on the side of the indoor unit or under the front cover for a label with the model number. The outdoor unit has its own label too. Send the indoor model through our parts enquiry form and we'll confirm the display board.