383EER2001A Generic Pump Lint Filter Insert suits LG Front Load Washing Machines WD14030D6 WD14060SD6 WD1409NPW WV9-1409W F14A8RDS

Lost, cracked or stuck pump filter on your LG front loader? Part 383EER2001A is a generic replacement for the lint trap insert that fits into the drain pump housing, usually behind a small panel at the bottom front of the machine. It's listed for 71 LG models, including the WD14030D6 and WD14060SD6, the WD1409NPW and WD12590D6, the WV9-1409W, and the F1069FD and F14A8RDS.

LG washer not draining or leaking at the filter

Before water reaches the drain pump it passes through this insert, which catches coins, buttons, hair ties and lint that would otherwise jam the impeller. A blocked trap slows or stops draining, so the wash ends with water in the drum, clothes come out soaking, or the machine shows a drain error. If the insert is cracked, its seal is worn or it has been left out, water can leak from the filter access point at the front, and debris goes straight into the pump. Cleaning it regularly keeps the drain flowing.

Part details

• Generic replacement, part 383EER2001A
• Pump lint filter trap insert
• Suits LG front load washing machines
• Listed for 71 LG models across the WD, WV and F series

Cleaning and replacing the filter

Turn the washer off and put a shallow tray and towels in front, as water will come out. Open the access panel, drain any water through the small hose if your model has one, then unscrew the old filter anticlockwise. Clear any debris from the housing and check the pump impeller turns freely. Screw the new insert in firmly so it seals, then run a rinse and spin to check for leaks.

Questions about this part

Is this an LG-made filter?

No, 383EER2001A is a generic replacement made to suit LG front loaders. It's listed for 71 LG models, so match the model number on your machine's label, usually inside the door opening or on the back, to the list before ordering.