3570698013 Genuine Ignition Spark Plug 250mm Lead Cast Type for Electrolux Group Gas Cooktops, 357069801

Genuine Electrolux spark plug 3570698013 has a short 250mm lead and is listed as the Cast type. The 9 digit form, 357069801, is the same number without the last digit and may be the one printed on older paperwork. It's an ignition part for Electrolux group gas cooktops. Lead length decides whether the plug will reach the ignition module neatly, so a plug with a longer or shorter lead from another number isn't a good swap.

Signs your cooktop spark plug has failed

Each burner on a gas cooktop has its own spark plug sitting beside it. The plug's job is to deliver a spark to the burner when the knob is pushed in. Faults show up as one burner that won't light while the others do, a faint orange spark instead of a sharp blue one, a spark that jumps to the pan support instead, or no spark at all. Grease and boil overs are common culprits, so clean the tip with a dry toothbrush first. If the porcelain is cracked or the lead is damaged, replacement is the fix.

Part details

• Genuine Electrolux part 3570698013
• Also listed as 357069801
• Ignition spark plug with 250mm lead, Cast type
• For Electrolux group gas cooktops, model fit not on file

Fitting a short lead spark plug

Turn off gas at the isolation valve and switch off power before removing the burner parts. A licensed gas fitter or qualified technician should handle work on a gas appliance. Lift the cooktop or remove the burner base to reach the plug, note where the old lead connects to the module, and fit the new one to the same terminal. Keep the lead clear of the burner and check the spark on each burner afterwards.

Questions about this part

My old spark plug lead is longer. Can I use this 250mm one?

Only if 250mm reaches the ignition module without stretching. Leads are sized for where each burner sits, so a shorter lead may not reach at all. Match the number on your old plug, or check with us through the parts enquiry form.