3300362781 Genuine Configured Induction Module for Electrolux Group Induction Cooktops, Factory Set Replacement Board

Electrolux part 3300362781 is a genuine configured induction module for Electrolux group induction cooktops. A configured module comes set up from the factory for a particular group of cooktops, so the number has to match. We don't have a model list for this one. Read the label on your existing module, or send the model and product number from the cooktop's rating plate through the parts enquiry form and we'll confirm it.

Induction cooktop zones not heating? Check the module

The induction module is the power electronics under the glass. It takes mains power and drives the copper coils that heat the pan. When it fails you may see one or more zones that won't heat, error codes on the touch controls, a cooktop that trips the safety switch or circuit breaker, or a clicking noise with no heat. Because a faulty module can look like a touch control fault, a technician should test the supply and the control board first, and check whether the fault follows a particular zone.

Part details

• Genuine Electrolux part 3300362781
• Configured induction module
• For Electrolux group induction cooktops
• Match the number on the old module before ordering

Who should fit an induction module

Induction cooktops are normally hard-wired, so isolate the circuit at the switchboard and have a licensed electrician do the job. The cooktop has to come out of the bench to reach the module. Photograph every cable and plug before disconnecting, keep track of the fixing screws, and test each zone with an induction-ready pan once power is back on.

Questions about this part

Can I use a module from a different cooktop?

Not safely. Configured modules are set up for particular cooktops, so a module that looks the same can behave differently. Use the number printed on your old module, or one confirmed for your cooktop's model and product number.