30104700006 Genuine LED Light for Glen Dimplex Group Rangehoods, Replacement Rangehood LED Lamp Fitting

This genuine Glen Dimplex LED light carries part number 30104700006. LED lights in the same Glen Dimplex number range are rangehood downlights, which is where this one is expected to be used. They vary in diameter, mounting clips, connector and colour temperature, so a light from another model rarely fits. Take your old light out and check its number, or look it up on the parts list for your rangehood, to be sure 30104700006 is the right one.

Rangehood light flickering or not working?

LED lights last much longer than the old halogen globes, but they still fail. Heat and grease rising from the cooktop take a toll on the driver electronics and solder joints, and cleaning sprays can work their way into the fitting. Typical signs are a light that flickers, comes on dim, takes a moment to start, or stays dark while the other lights work. If every light is out at once, the switch, wiring or a shared driver is more likely than the LEDs themselves, so check those before ordering.

Part details

• Genuine Glen Dimplex part 30104700006
• LED light
• Match size, clips and connector to your old light
• Expected to suit Glen Dimplex group rangehoods, check your number

Changing the LED light

Turn the rangehood off at the wall or isolator before touching any light fitting. Remove the grease filters if they block access. Most LED lights are held by spring clips or a twist fitting and connect with a small plug behind the panel. Ease the old light out, unplug it, connect the new one and press it home until it sits flush. Hard-wired rangehoods should be handled by a licensed electrician.

Questions about this part

Can I fit a halogen globe in place of this LED light?

No. LED fittings and halogen globes use different power supplies and fittings, and swapping types can damage the driver or create a heat problem. Stick with the LED light that matches your old part number.