30102700006 Genuine Electric Hotplate 1000W for Glen Dimplex Group Cooktops and Upright Cookers, Replacement Hotplate Element

Part 30102700006 is a genuine 1000W hotplate from the Glen Dimplex parts range, used on electric cooktops and upright cookers. Our record doesn't list the diameter or models, so check the wattage stamped on your old plate, measure it across the top and compare the number on your parts list before ordering.

Signs your hotplate has burnt out

An electric hotplate has a heating element inside that the control switches on and off to hold the setting you choose. When the element fails, the plate stays cold on every setting while the others work. You may also notice it only warms on high, takes far longer than it used to, has cracked or bulged, or trips the safety switch as soon as it's turned on. A burnt terminal at the back of the plate is another clue, and the connection on the cooker side should be checked at the same time.

Part details

• Genuine part 30102700006
• Electric hotplate rated at 1000W
• Glen Dimplex group cooking appliances
• Diameter not on file, measure your old plate

Fitting a new hotplate

Turn the cooker off at the switchboard and wait until the plate is cold. Cookers are hard wired, so a licensed electrician should do the replacement. Photograph the terminal connections before removing the old plate. If the wiring or terminals are scorched, replace those too, and check the control switch for that plate. Make sure the new plate sits level so spills can't get underneath.

Questions about this part

How do I confirm this is the right hotplate?

Look for the wattage on the underside or rim of your old plate and measure its diameter. It should read 1000W, and the size and terminal layout should match. If your old plate is unreadable, send the cooker's model number through our parts enquiry form.