2970101700 Genuine Heater Element for Beko Appliances, Beko Replacement Heating Element, Match the Number on Your Old Heater

2970101700 is a genuine Beko heater, the factory heating element Beko supplies under this number. It's listed simply as a heater, without the appliance named, so the fit comes down to matching numbers. Look for 2970101700 on the label or stamping of the old heater, or in the parts list for your Beko model. If they match, this is the right element for your machine.

Signs a Beko heater element has failed

A heating element is a resistance wire sealed inside a metal sheath. When the wire breaks, the element goes open circuit and produces no heat. When the sheath cracks, moisture reaches the wire and the element leaks to earth, which trips the safety switch. In a washing machine, a dead heater means cold washes, a cycle that stalls or a heating error code. In a dryer, loads come out damp after a full cycle. Check the element with a multimeter for resistance and insulation before ordering.

Part details

• Genuine Beko part 2970101700
• Heater element
• Replaces an open circuit or earth leaking Beko heater

Testing and replacing the heater

Unplug the appliance at the wall, and turn off the taps if it's plumbed in. Measure the old heater's resistance across its terminals, as an open circuit or a reading to earth confirms it has failed. Photograph the wiring before disconnecting. Where the heater is held by a clamp or expanding seal, loosen it and ease the old one out. Fit the new heater the same way, reconnect and run a heated program to test.

Questions about this part

Which Beko appliance is this heater for?

The appliance isn't recorded against 2970101700. Find the model and serial number on your Beko's rating label and send them through our parts enquiry form, or check the number on your old heater. We'll confirm the match before you order.