2849660600 Genuine Door Lock for Beko Washing Machines, Beko Front Loader Door Interlock Switch Replacement

Part 2849660600 is a genuine Beko door lock, the interlock that holds a Beko front loader's door shut while there's water in the drum or the drum is turning. The machine won't start a cycle until this lock tells the control board the door is secured. No models are on file, so compare the number on the old lock, or send the model number from the label inside the door rim through our parts enquiry form.

Beko washer door won't lock or won't open?

When you start a wash, the door lock engages a latch and sends a signal back to the control, then releases once the drum has stopped and the water level is safe. If the lock fails, the machine may refuse to start, show a door error, click repeatedly while trying to lock, or stop part way through a program. A lock that sticks in the engaged position leaves the door shut at the end of the cycle. A broken door handle or catch can look similar, so check those first.

Part details

• Genuine Beko part 2849660600
• Front loader door lock interlock
• Signals the control board that the door is closed
• Check the plug and mounting against the old lock

Replacing the door lock

Unplug the washer and make sure the drum is empty. Peel back the outer lip of the door seal by removing its clamp ring, then undo the screws holding the lock to the front panel. Reach behind to unplug the connector. Fit the new lock, reconnect it, and refit the seal and clamp evenly before testing a short cycle.

Questions about this part

How do I open the door if the lock is stuck?

Unplug the machine and wait a few minutes, as many locks release once power is removed. Make sure the drum has no water in it first. Many front loaders also have an emergency release, often near the drain filter, so check your user manual before forcing the door.