2841420100 Genuine Drain Pump for Beko Washing Machines, Beko Washer Water Outlet Pump Replacement Part

If your Beko washer leaves water in the drum or stops with a drain fault, the drain pump is often to blame, and 2841420100 is the genuine Beko pump under that number. It empties the tub between washes and before spin. No models are on file, so check that 2841420100 matches the number on the old pump or your parts list, or send the model number from the door rim label through our parts enquiry form.

Beko washing machine not draining?

The drain pump sits low at the front of most front loaders, behind a filter that catches coins, hair clips and lint. When it can't move water, the machine stops mid cycle with water still in the drum, clothes come out soaking, or an error code appears. A pump that hums but won't drain is often jammed or has a broken impeller, while one that makes no sound at all may have a failed coil. Always clean the pump filter and check the drain hose for kinks before replacing the pump.

Part details

• Genuine Beko part 2841420100
• Washing machine drain pump
• Empties the drum before rinse and spin
• Check the number on the old pump before ordering

Changing the drain pump

Pull the washer's plug from the wall and close both taps. Lay towels down and drain the remaining water through the emergency hose or filter cap. Access is usually through the front kick panel or by tilting the machine back. Photograph the hose and wire positions, swap the pump across, and run a rinse and spin to check it pumps out without leaking.

Questions about this part

The pump hums but nothing drains. Is it the pump?

Not necessarily. Clear the pump filter and look for a sock or coin in the pump housing first, as a blockage gives the same hum. If the impeller turns freely and it still won't pump, the pump has likely failed and needs replacing.