2836480100 Genuine Water Inlet Valve for Beko Washing Machines, Beko Washer Fill Solenoid Valve Replacement, Original Part

Part 2836480100 is a genuine Beko water inlet valve. It's the electrically operated valve where the tap hose connects at the back of the machine, opening on command from the control board to let water in and closing tight when the fill is done. It suits Beko washing machines built with this valve. Check the number on your old valve, and the number of outlets, before ordering.

Signs the inlet valve on your Beko washer has failed

Inlet valves use solenoid coils to open, with a fine mesh screen at the inlet to catch grit. When a coil burns out, the machine won't fill and shows a water supply error even with the taps on. A partly blocked screen or sticking valve means slow filling and long cycles. The opposite fault is worse. A valve that won't close fully keeps trickling water in while the machine is idle, which can leave water standing in the tub or even overflow it. Clean the inlet screen first, then test the coil resistance.

Part details

• Genuine Beko part 2836480100
• Water inlet (fill) valve
• Controlled by the washer's control board
• Suits Beko washing machines built with this valve

Changing the inlet valve

Turn off both taps, unplug the machine and disconnect the fill hose, catching any water. The valve is usually reached by removing the top panel. Photograph the wiring and hose positions, unclip them, and undo the fixing screw or clip. Fit the new valve, reconnect everything exactly as before, then open the taps and run a short wash to check for leaks.

Questions about this part

Is this valve for hot and cold or cold only?

The number of inlets and outlets isn't recorded for 2836480100, so compare it with your existing valve. Matching the part number on the old valve is the safest check. If yours is worn or missing a label, send your model number through our enquiry form.