2816750200 Genuine Poly-V Drive Belt for Beko Washing Machines, Beko Washer Motor to Drum Belt Replacement

Beko's genuine poly-V drive belt 2816750200 suits Beko washing machines built with this belt. It links the motor pulley to the large drum pulley at the back of the tub, turning the drum for washing and spinning. Poly-V belts come in many lengths and rib counts, and the size isn't on file for this one, so read the code printed on the old belt or match 2816750200 to your parts list before ordering.

Washing machine drum not turning?

A worn or broken drive belt is one of the most common reasons a washer fills and drains but the drum won't move. You may hear the motor running with no drum movement, or the drum may turn slowly and slip under a full load. Belts that are stretched, glazed or cracked across the ribs often squeal, smell of hot rubber, or come off the pulley during spin. If the belt keeps jumping off, check the drum pulley and bearings too, as play there pulls the belt out of line.

Part details

• Genuine Beko part 2816750200
• Poly-V ribbed drive belt
• Connects the motor to the drum pulley
• Check the size code on the old belt before ordering

Fitting a new drive belt

Unplug the washer and turn off the taps. Remove the back panel to reach the belt. Loop the new belt over the motor pulley first, then feed it onto the drum pulley and rotate the drum by hand so it rolls into place. Make sure every rib sits in the pulley grooves, refit the panel and run a short spin to test.

Questions about this part

How do I read the size on my old belt?

Poly-V belts usually carry a code made up of a rib count, profile letters such as PH or PJ, and a length in millimetres. Note that code from your old belt. If it has worn off, send your washer's model number through the parts enquiry form and we'll confirm the belt.