264440193 Genuine Oven Fan Motor for Beko Ovens, Beko Fan Forced Convection Motor Replacement, Original Beko Part

Genuine Beko oven fan motor, part number 264440193. This is the motor that drives the fan at the back of a Beko fan forced oven, circulating heat from the element so food cooks evenly on every shelf. When it starts grinding, squealing or stops turning altogether, a new motor is the cure. Match 264440193 to the label on your old motor or your oven's parts list before ordering.

Signs your Beko oven fan motor is failing

The fan motor runs every time you use a fan function, often for hours at high temperature, so its bearings eventually wear. Early signs are a rumbling, grinding or high-pitched noise that changes as the motor warms up. Later the fan slows, stalls or stops. With no air movement, a fan oven cooks unevenly, the element may run hotter than it should, and the oven can trip its overheat cut-out. With the oven cold and off, check the fan blade spins freely by hand, as a stiff or wobbly blade points to the motor.

Part details

• Genuine Beko part 264440193
• Oven fan motor
• Drives the convection fan in Beko fan forced ovens

Fitting the oven fan motor

Isolate the oven at the circuit breaker and let it cool completely. Built-in ovens are normally hard-wired, so the job should be done by a licensed electrician. The fan blade comes off from inside the cavity, and on many ovens its nut has a left-hand thread. The motor then unbolts from the rear panel. Note the wiring and any seal on the shaft, fit the new motor, refit the blade and test on fan.

Questions about this part

How can I confirm this motor fits my oven?

Look for the part number on the label of your existing motor, or check the model and product number on the oven's rating plate. Send those through our parts enquiry form if you're unsure and we'll confirm 264440193 is the right motor.