264440148 Genuine Oven Fan Motor for Beko Ovens, Beko Fan Forced Convection Motor Replacement

264440148 is the genuine Beko oven fan motor, the motor that drives the fan at the back of the cavity on fan forced Beko ovens. It's Beko's own part, so the mounting and connections suit the ovens that list this number. There's no model list on file for 264440148, so confirm the number on the old motor's label, or in your oven's parts list, before ordering.

Beko oven fan noisy or not spinning? Signs of a failing fan motor

The fan motor spins the fan blade inside the oven, pushing heated air around the food so it cooks evenly on every shelf. Worn motor bearings usually give warning first, with a grinding, squealing or humming sound that gets louder as the oven heats. Eventually the fan may turn slowly, stall, or stop altogether. Without the fan, fan forced functions cook unevenly or barely heat. Before replacing the motor, check that the fan blade turns freely by hand with the power off, as a loose or rubbing blade makes similar noises.

Part details

• Genuine Beko part number 264440148
• Oven fan (convection) motor
• For Beko ovens
• Check the number on the old motor before ordering

Replacing the fan motor

Cut power to the oven at the circuit breaker and give it time to cool. Remove the fan cover inside the oven and undo the fan blade, which often has a reverse thread, then take off the back panel to reach the motor. Photograph the wiring and note any insulation or seals before swapping the motor over. If the oven is hard-wired, a licensed electrician should do this job.

Questions about this part

Do I need a new fan blade as well?

Not usually. The blade normally moves from the old motor to the new one. Replace it only if it is bent, cracked or loose on its hub, as a damaged blade causes noise and vibration that can wear the new motor quickly.