255440101 Generic Oven Door Seal suits Beko, Euromaid Ovens BS7 BS8 ES7 CDDS60 GDDS60 GTEOS60 EW60 BO7C RMO7 LES7H

Part 255440101 is a generic oven door seal made to suit Beko and Euromaid ovens. It is a compatible aftermarket seal, not a factory branded part. Thirty models are on file. Among them are the BS5 and BS6, the BS7 and BS8, the BW8 and ES7, the ES60 and EW60, the CDDS60 and CDDW60, the GDDS60, the GTEOS60 and GTEOW60, and the LES7H, RMO7 and BO7C. Matching the seal to your model keeps the door closing snugly.

Signs your Euromaid or Beko oven seal needs replacing

Every time the door closes, the seal compresses against it to trap heat in the cavity. Heat and grease gradually wear the material, so it can go flat, crack, come loose at the corners or tear where the door rubs. You'll notice longer preheat times, food that cooks unevenly, hot air puffing out at the top of the door and a door front or control panel that gets much hotter than it used to. Gaps you can see with the door shut confirm it.

Part details

• Generic compatible oven door seal
• Part number 255440101
• Suits Beko and Euromaid ovens
• 30 models on file

Fitting the replacement seal

Switch the oven off and wait until it is completely cold. Look closely at the old seal, its join position and how the corners are held, then remove it. Starting at the top centre, fit the new seal and press it in firmly as you work round, keeping the corners tight and avoiding stretching. Shut the door on a strip of paper at several points to check the seal grips evenly.

Questions about this part

My model number is short, like BS7. Is that the full number?

Short codes like BS7 or ES7 are common on these ovens, but the rating label may also show a longer product or serial number. Send both through our parts enquiry form if you'd like the fit checked.