246028200 Genuine Oven Door Hinge for Eurostyle Group Ovens, Replacement Spring Loaded Oven Door Hinge

Oven hinge 246028200 is a genuine spare from the Eurostyle Group for its ovens. The hinge lets the door drop down and spring back up, holding it firmly closed against the seal when shut. We don't have a brand or model list on file for this hinge, and many oven hinges look alike, so compare the number stamped on your old hinge or send us the brand, model and serial number from the oven's rating plate.

Oven door not closing or dropping open? Check the hinges

Each oven door hinge has a strong spring and a lever arm that balances the weight of the door. When the spring weakens or breaks, or the arm bends, the door falls open, won't stay part open, or closes with a gap at the top. Heat then escapes, the oven takes longer to reach temperature, and the control panel and cabinets around it can get very hot. Hinges also wear at the pivot and catch, making the door rattle or sit crooked. A clicking or grinding noise when opening is another early sign.

Part details

• Genuine Eurostyle Group part 246028200
• Spring loaded oven door hinge
• Replaces a worn, bent or broken hinge
• No model list on file, confirm by number or model

Replacing an oven door hinge

Switch the oven off at the wall or switchboard and make sure it's cold. Open the door fully, flip up the hinge locking levers if fitted, then lift the door off at an angle with a helper, as it's heavy and the glass can break. Swap the hinge, refit the door and lower the levers. Check that the door closes evenly on its seal.

Questions about this part

Should I replace both hinges at once?

It's a good idea. Both hinges carry the same load and wear at a similar rate, so a new hinge on one side and a tired one on the other can leave the door uneven. Check whether your oven uses the same hinge on each side before ordering two.