2306010.002 Genuine Inner Aluminium Rangehood Filter 500 x 135mm for Ariston, Tisra Rangehoods ARHS60XL

Ariston and Tisra rangehoods that take a 500 x 135mm inner filter can use this genuine aluminium part, number 2306010.002. It is listed for the Ariston ARHS60XL. Aluminium filters can be washed many times, but once the mesh tears, the frame bends or grease has baked in hard, a new one is the better fix. Measure your old filter and look for 2306010.002 on the frame to confirm you have the right one.

Is your Ariston rangehood filter due for replacement?

This filter sits inside the hood, in front of the fan, and traps grease from cooking vapour before it can coat the motor and ducting. A clogged filter cuts the extraction rate, so steam fogs up the kitchen and smells hang around longer than they should. Damaged mesh lets grease straight through, which shows up as sticky residue on the fan housing or drips back onto the cooktop. If the hood has become noisy or weak and cleaning the filter no longer helps, fitting a fresh filter is a simple first step.

Part details

• Genuine part 2306010.002
• Inner aluminium filter, 500 x 135mm
• Suits Ariston and Tisra rangehoods
• Listed for the Ariston ARHS60XL

Fitting the inner filter

Switch the rangehood off at the wall first. The inner filter is reached from under the hood, so remove any outer filter or cover panel, then release the old filter from its catches. Check the new one matches the 500 x 135mm size, slide it into place facing the same way as the original, and refit the outer parts. Wash it regularly in warm soapy water to keep the airflow up.

Questions about this part

Can I wash this aluminium filter?

Yes. Aluminium filters are made to be cleaned, either by hand in hot soapy water or in the dishwasher if your rangehood manual allows it. Let it dry fully before refitting, and replace it once the mesh is torn or the frame is bent.