2199070 Genuine Oven Door Hinge for Ariston 600mm Ovens, Ariston 60cm Oven Hinge for a Dropping or Loose Oven Door

This is the genuine Ariston oven hinge, part 2199070, listed for 600mm ovens. Hinges carry the full weight of the oven door every time it opens, and once one wears, the door starts to drop, gap or slam. The 600mm size refers to the oven width, so this isn't the hinge for Ariston's 900mm ovens. We don't hold a model list for 2199070, so match the number on your old hinge first.

Ariston oven door dropping or not closing? Check the hinges

Each hinge has a spring loaded arm that balances the door through its swing and pulls it closed against the seal. When the spring weakens or the arm bends, the door may fall open too fast, sit unevenly, or leave a gap at the top that lets heat escape. You might notice the door glass fogging, the knobs or control panel getting hot, or food taking longer to cook. Leaning on an open door or using it as a step is a common cause of bent hinges.

Part details

• Genuine Ariston hinge 2199070
• For 600mm Ariston ovens
• Balances the door and holds it closed against the seal
• The 900mm oven hinge is a different part, 2199071
• Model fit not on file, compare with your old hinge

Fitting a new oven hinge

Let the oven cool completely and switch it off at the wall or isolator. On most Ariston ovens you open the door fully, flip the small locking clips over on each hinge, then close the door partway and lift it off at an angle. Lay it flat on a towel. Undo the hinge screws in the oven frame, fit the new hinge and refit the door.

Questions about this part

Should I replace both oven hinges?

If the door sits unevenly or both hinges are the same age, replacing both is usually the better fix, because a new hinge paired with a tired one can leave the door twisted. Check that your second hinge carries the same number before ordering two.