210443248 Genuine Oven Door Hinge for Beko Ovens, Beko Replacement Hinge for a Dropping or Misaligned Door

Beko oven door falling open or leaving a gap at the top? Part 210443248 is a genuine Beko oven door hinge, a direct replacement for a worn or broken hinge on Beko ovens. It's the factory part, so it matches the hinge Beko fitted. As there's no model list on file for 210443248, check the number on the old hinge or in the parts list for your oven before you order.

What happens when a Beko oven hinge wears out

Oven door hinges work hard. They balance the door's weight with a spring so it can be opened gently, held partly open for checking food and closed firmly against the seal. Wear shows up as a door that crashes down when released, won't stay shut, tilts to one side, or lets steam and heat escape around the top. Sometimes a hinge arm breaks outright after someone leans on the open door. Because a misaligned door also strains the seal and the other hinge, it pays to fix the problem early.

Part details

• Genuine Beko part number 210443248
• Oven door hinge
• For Beko ovens
• Match the number on the old hinge before ordering

Replacing the hinge

Cut the power at the wall or isolator and wait for the oven to cool. Lower the door fully, lock both hinges with their clips or levers and lift the door off at an angle. Remove the screws holding the old hinge, fit the new one and tighten it evenly. Rehang the door, release the hinge locks and check it closes evenly against the seal.

Questions about this part

Do I need to replace both hinges?

Not always, but it's often worth it. If one hinge has failed through wear, the other has done the same work and may not be far behind. Replacing both keeps the door balanced. Check whether your oven uses the same number on each side.