210442230 Genuine 60/60 Front Door Hinge, Shorter Type, for Beko Ovens, Beko Replacement Oven Door Hinge

This is Beko's genuine 60/60 front door hinge in the shorter type, part number 210442230. The description calls it the shorter type, which tells you a longer version exists, so length matters when you're matching it to your oven. Compare your old hinge against this one, and check the number in your parts list, before ordering. No model list is held for 210442230.

How a worn front door hinge shows up on a Beko oven

The front door hinges let the oven door swing down and hold it closed against the seal under spring tension. As they age, the springs lose strength and the door begins to fall open faster, hang lower on one side, or bounce rather than closing cleanly. You might notice heat escaping from the top edge, a door that no longer lines up with the control panel, or a hinge arm that looks bent after a heavy tray was rested on the open door. A hinge of the wrong length won't seat the door properly, so match the shorter type exactly.

Part details

• Genuine Beko part number 210442230
• 60/60 front door hinge
• Shorter type
• For Beko ovens
• Check the length against your old hinge

Fitting the front door hinge

Switch the oven off at the power point or isolator and let it cool. Open the door, secure the hinge locks and lift the door away. Undo the hinge fixings inside the oven frame, noting which way the hinge faces, then fit the new hinge the same way round. Refit the door and check it closes square before using the oven.

Questions about this part

What does 60/60 mean on this hinge?

It's part of the stock description for this hinge and isn't explained in our records. The safest approach is to match the part number 210442230 and the shorter length of your old hinge, or send your model number so we can confirm the fit.