1811162 Genuine Bromic Pro Oxyset Brazing and Welding System for 2.2L Cylinders, Oxy Brazing Kit for Refrigeration and AC Work

1811162 is the Bromic Pro Oxyset brazing and welding system, in the version made for 2.2L cylinders. Bromic's Oxyset is a compact oxy brazing setup that refrigeration and air conditioning technicians use to braze copper pipe and fittings on the job. The 2.2L size matters when you're buying cylinders or replacing parts, so confirm it matches the bottles you plan to use.

Brazing copper pipework on site

Refrigeration and air conditioning systems rely on brazed copper joints to hold refrigerant under pressure for years. A good joint needs enough heat to draw the filler rod right through the fitting, and an oxygen-fed flame gets there faster and hotter than a fuel-only torch. That makes a compact oxy kit handy for service calls, split system installs and repairs in tight roof spaces or cupboards, where full-size gas bottles are impractical. Clean pipe ends, the right filler and good heat control are what make a joint leak free.

Part details

• Bromic part 1811162
• Pro Oxyset brazing and welding system
• Made for 2.2L cylinders
• Suited to refrigeration and air conditioning brazing

Using the Oxyset safely

Read Bromic's instructions in full before first use and check every connection for leaks with a suitable leak detection fluid. Work in a ventilated area, keep a fire extinguisher and fire blanket nearby, and shield timber, cables and insulation from the flame. Wear eye protection rated for brazing. Work on refrigerant circuits in Australia needs a refrigerant handling licence, so this kit is intended for licensed technicians.

Questions about this part

Does the 2.2L refer to the cylinder size?

Yes, 2.2L is the cylinder size this Oxyset version is made for. Check that the cylinders you plan to use match before buying, and follow Bromic's guidance on compatible gases and fittings.