1760014643 Genuine Recirculating Duct for Electrolux Group Rangehoods, For Ductless Recirculation Installs

When a rangehood can't be vented outdoors, it's set up to recirculate, sending the air back into the kitchen after it passes through filters. Part 1760014643 is the genuine Electrolux group recirculating duct used in that setup. There's no model list on file for it, so check your rangehood's model number on the rating label, usually behind the grease filters, and send it to us if you'd like the fit confirmed.

How a recirculating duct works in a ductless rangehood

In recirculating mode, the fan draws cooking fumes up through the grease filters and charcoal filters, then the recirculating duct directs the cleaned air back out into the room rather than up a flue. If the duct is missing, cracked or poorly fitted, air can leak inside the canopy or chimney cover, the rangehood gets noisier, and less smoke and odour is captured. It's also a common missing part when a rangehood is moved to a new kitchen or converted from ducted to recirculating.

Part details

• Genuine Electrolux group part 1760014643
• Recirculating duct for ductless rangehood installs
• For rangehoods running in recirculating mode

Installing the recirculating duct

Isolate power to the rangehood before removing the chimney cover or canopy panels. Fit the duct so it seals against the fan outlet and lines up with the vents in the chimney cover, then secure it the way the original was. Make sure charcoal filters are fitted, as recirculating without them sends grease and odour straight back into the kitchen.

Questions about this part

Do I need this if my rangehood vents outside?

No. A rangehood ducted to the outside uses ducting that runs to the roof or an external wall instead. 1760014643 is for rangehoods set up to recirculate. If you're converting from ducted to recirculating, send us your model number to check what else you need.