1760008784 Genuine Freezer Door Seal 1622 x 394mm for Westinghouse Fridge Freezers, Also Listed as 1458754 and 1455498

Need a new seal for a tall Westinghouse freezer door? Part 1760008784 is the genuine Electrolux freezer door gasket, measuring 1622 x 394mm. It's also listed under the numbers 1458754 and 1455498, so if any of those appear on your paperwork or the old seal, this is the part. A quick tape measure check of the old gasket is an easy way to confirm the size before you order.

Signs your Westinghouse freezer door seal needs replacing

The magnetic gasket around the freezer door holds the cold in and keeps warm, moist air out. Once it splits, flattens or pulls away at a corner, that humid air gets in and turns straight to ice. Look for frost building up near the door edge, a door that doesn't pull shut by itself, food softening near the front, or the freezer running much longer than it used to. Try closing the door on a strip of paper at several points. If it slides out without resistance, the gasket isn't gripping there.

Part details

• Genuine Electrolux part 1760008784
• Magnetic freezer door gasket
• Size 1622 x 394mm
• Also listed as 1458754 and 1455498
• For Westinghouse fridge freezers

Tips for fitting a freezer door seal

Switch off at the wall before you start. Seals are folded for transport, so warm the new one in the sun or with a hair dryer on low until the creases relax. Remove the old gasket one side at a time and fit the new one the same way it came out, whether it pushes into a channel or is held by screws under the inner lip. Give it a day to settle before judging the seal.

Questions about this part

How do I check the size of my old seal?

Measure the gasket across its outside edges, top to bottom and side to side, while it's still on the door. This one measures 1622 x 394mm. If your measurements are close and your paperwork shows 1760008784, 1458754 or 1455498, it's the right seal.