1752480100 Genuine Dishwasher Heat Pump for Beko Dishwashers, Circulation Wash Pump with Built-In Water Heater

Beko dishwashers that use a heat pump combine the wash circulation pump and the water heater in one unit, and 1752480100 is the genuine Beko part for that job. It pushes heated water up to the spray arms through each cycle. No models are on file, so match 1752480100 to the number on the old pump or the parts list, or send the model and product number from the door label through our parts enquiry form.

Dishwasher not heating or not washing properly?

Inside the base, the heat pump draws water from the sump, warms it as it passes the built-in element and drives it out to the spray arms. When the heater side fails, dishes come out cold and greasy, cycles drag on much longer than normal or stop with a heating error, and the safety switch may trip. A failing motor side shows up as a humming noise with little or no spray, weak cleaning on the top rack, or water sitting in the tub without moving. A multimeter test across the heater and motor terminals helps confirm the pump is at fault before you order.

Part details

• Genuine Beko part 1752480100
• Circulation pump and water heater in one unit
• Suits Beko dishwashers built with this pump
• Fixes no heat and poor wash faults caused by the pump

Replacing the heat pump

Unplug the dishwasher, turn off the tap and soak up any water left in the sump. On many models the machine has to come out of its cavity and be tilted to reach the pump from underneath, so it's a job many owners hand to an appliance technician. Take photos of the hoses, clamps and wiring plugs first. Refit every seal and clamp carefully, then run a hot program and watch for leaks.

Questions about this part

Is a heat pump the same as a drain pump?

No. The heat pump circulates and heats the wash water, while a separate drain pump empties the tub at the end of each stage. If your dishwasher won't drain but heats fine, the drain pump is the more likely fault.