1752000400 Genuine Dishwasher Drain Hose 2085mm for Beko, Euromaid Dishwashers BDW14BS BDW16BS BSS14 DFN28430W EDWB14S EDWB16S

Water pooling under the dishwasher, or a split hose behind the cabinet? Part 1752000400 is the genuine Beko dishwasher drain hose, 2085mm long, and it's also listed as 1740161500. It suits Beko and Euromaid dishwashers, with 19 models on file. The BDW14BS and BDW16BS are on the list, as are the DFN28430W, the EDWB14S and the EDWB16S.

Dishwasher not draining or leaking from the hose?

The drain hose carries waste water from the pump out to your sink trap or standpipe. Hoses get kinked when the dishwasher is pushed back into its cavity, crushed by cabinetry, or split with age where they flex. A kinked or blocked hose leaves water sitting in the tub at the end of a cycle, often with a drain error, while a split shows up as water on the floor or a swollen cabinet base. Check the hose run and the sink connection before blaming the pump.

Part details

• Genuine Beko part 1752000400
• Also listed as 1740161500
• Drain hose, 2085mm long
• Suits 19 Beko and Euromaid dishwasher models

Replacing the drain hose

Turn the dishwasher off at the wall and close the water tap. Slide the machine out, keeping towels down for water left in the old hose. Note how the hose is routed and clipped, then disconnect it at the pump and at the sink end. Run the new hose the same way, with a high loop before the sink connection where your setup calls for one, and check for kinks before pushing the machine back.

Questions about this part

Is 2085mm long enough for my kitchen?

That's the length of this hose for the listed models. If your sink connection sits further away than the old hose reached, talk to a plumber about a proper extension rather than joining hoses yourself.