1740161400 Genuine Dishwasher Drain Hose for Beko, Euromaid Dishwashers EDW14S EDW14W BD14FSDX DC14S HNBD12S VDW14S 1740160300

Water on the floor behind the dishwasher, or a hose that has split where it bends? 1740161400 is the genuine Beko drain hose used on Beko and Euromaid machines, and it carries the alternative number 1740160300. Models on file include the HNBD12S and BD14FSDX, the DC14S, the EDW14S and EDW14W, and the VDW14 and VDW14S. Check your model plate against the list before ordering.

Leaks and slow draining from a dishwasher drain hose

The drain hose carries waste water from the pump to your sink trap or standpipe. Because it's often squeezed in behind the cabinet, it can split, kink or get crushed when the dishwasher is pushed back into place. A damaged hose shows up as water pooling under or behind the machine, water left in the base after a cycle, or dirty water siphoning back in. Grease and food can also build up inside an old hose and slow the flow. If the hose is cracked or perished, replace the full length rather than patching it.

Part details

• Genuine Beko part 1740161400
• Alternative number 1740160300
• Drain hose for dishwashers
• Suits Beko and Euromaid models such as HNBD12S, BD14FSDX, EDW14S and VDW14S

Fitting the drain hose

Turn the dishwasher off at the wall, close the tap and slide the machine out. Have a towel and tray ready, as water left in the hose will run out. Connect the new hose to the pump outlet and secure the clamp, then run it to the drain without kinks. Keep a high loop or air gap at the sink end if your installation calls for one, to stop dirty water siphoning back.

Questions about this part

Is 1740160300 the same hose?

Yes, 1740160300 is listed as an alternative number for this drain hose. If your old hose or parts list shows either number, 1740161400 is the one to order for the listed Beko and Euromaid dishwashers.