1471046308 Genuine Drain Pump for Electrolux Group Appliances, Also Listed as 147104630, Replacement Waste Water Pump

Genuine Electrolux group drain pump 1471046308 is also catalogued under the nine digit number 147104630, so either may appear on your old pump or in a parts list. A drain pump removes waste water from the appliance at the end of each stage of the cycle. The stock description doesn't say which appliance it comes from, so match the number on the old pump's label before you buy.

Water left inside? Signs of a failed drain pump

A drain pump uses a small motor and impeller to push water out through the drain hose. When it fails, the appliance usually stops mid-cycle with water still inside, shows a drain error, or hums without anything pumping. A blocked pump can also be noisy, rattling with trapped debris. Before replacing the pump, clean the filter, check the drain hose for kinks and make sure the sink spigot or standpipe is clear, as blockages are a common cause of draining faults. If the impeller is jammed or broken, or the motor is open circuit, replace the pump.

Part details

• Genuine Electrolux group drain pump
• Part number 1471046308
• Also listed as 147104630
• Appliance not named, match the number on your old pump

Changing the drain pump

Unplug the appliance and turn off the water before starting. Have towels and a shallow tray ready, as water will be left in the pump and hoses. Photograph the wiring and hose positions, then swap the pump across, using new clamps if the old ones are weak. Run a short cycle and check underneath for leaks.

Questions about this part

Are 1471046308 and 147104630 the same part?

Yes. 147104630 is the same Electrolux number without the final digit, so you may see either one on the pump label or in a parts list. Both refer to this drain pump.