140242403024 Genuine 4 Point Ignition Switch Harness 60cm FC for Electrolux Group Gas Cooktops, Four Burner Spark Switch Loom

For a 60cm gas cooktop with four burners, part 140242403024 is the genuine Electrolux group ignition switch harness in the FC version. It joins the four knob switches into one loom that runs back to the spark generator. Electrolux also makes a 60cm SC version, 140242403057, along with 5 point harnesses for 90cm cooktops, so check the number on your current harness before ordering.

Igniters that won't stop clicking or won't spark

A 60cm cooktop relies on these four switches to tell the spark generator when a knob is pushed in. Spills that run down the knob spindles are the usual culprit, leaving moisture or residue in a switch so it either sticks on, making the igniters click non-stop, or stops making contact so pressing the knob does nothing. Heat damage to the wiring is another cause. If drying the cooktop out doesn't cure it, a new harness is the reliable fix, because the four switches come together on the one loom.

Part details

• Genuine Electrolux group part 140242403024
• 4 point ignition switch harness
• 60cm FC version
• SC version is a different number, 140242403057

Fitting by a licensed gas fitter

Turn off the power at the wall and close the gas supply first. In Australia, work on gas appliances must be done by a licensed gas fitter. Remove the knobs and cooktop top, unclip each switch from its valve and trace the loom back to the spark generator. Fit the new harness along the same route, away from hot parts, then test ignition on every burner.

Questions about this part

What's the difference between FC and SC?

They are version codes in the Electrolux description for 60cm harnesses. Their meaning isn't stated, but each has its own part number. Match the code on your old harness, or send us your cooktop's model and product number through the parts enquiry form.