140207156013 Genuine Cold Water Inlet Valve, One Inlet Two Outlets, for Electrolux Group Washing Machines, Dual Outlet

140207156013 is a genuine Electrolux cold water inlet valve for Electrolux group washing machines. It has one inlet from the cold tap hose and two outlets, so the machine can send water to different parts of the detergent drawer. Inlet valves come in several outlet layouts and angles, which is why it pays to match the number. Check 140207156013 on your machine's parts list or on the label of your old valve.

Washing machine not filling? The inlet valve could be the cause

The inlet valve is an electrically operated tap. When the control board energises one of its coils, that outlet opens and water flows to the matching part of the dispenser. A faulty valve can stop water coming in, so the machine sits waiting or shows a fill error. It can also stick partly open and let water trickle into the drum with the machine off, which is a sign to replace it quickly. Slow filling is another clue, though a blocked filter screen in the valve inlet or a kinked hose causes the same thing, so check those first.

Part details

• Genuine Electrolux part 140207156013
• Cold water inlet valve
• One inlet, two outlets
• For Electrolux group washing machines

Fitting the inlet valve

Turn off the taps and unplug the machine, then disconnect the inlet hose at the back. Remove the top panel to reach the valve. Label the internal hoses and wires for each outlet before taking them off, as mixing them up sends water to the wrong compartment. Fit the new valve, reconnect everything, open the tap and check for drips before running a cycle.

Questions about this part

Why does my washing machine fill when it's switched off?

Water entering the drum with the machine off usually means an inlet valve isn't closing fully. Turn the tap off until it's fixed to avoid flooding. If your machine uses 140207156013, replacing the valve should stop the trickle.