140202208033 Genuine Water Distributor Dual and Single for Electrolux Group Washing Machines, Replacement Distributor

This genuine Electrolux group water distributor, part number 140202208033, is catalogued as the dual and single version. A water distributor takes the incoming water and steers it where the machine needs it during filling. The dual and single tag suggests it suits machines with either valve setup, but please compare 140202208033 with the number on your old distributor to confirm the fit before ordering.

Water going where it shouldn't when the washer fills

Once water passes through the inlet valve, the distributor channels it into the tub or through the detergent and softener path. If it cracks, warps or its outlets block with scale, the flow goes wrong. You might see water splashing or leaking from the top of the machine during fill, detergent or softener left behind, slow filling, or puddles under the washer. Scale and lint build-up can sometimes be cleared, but a split body or broken mounting needs a new part.

Part details

• Genuine Electrolux group part 140202208033
• Water distributor, dual and single version
• Replaces a cracked, warped or blocked distributor
• No model list on file, match the number on your old part

Fitting the water distributor

Turn off the water taps and unplug the machine before removing the lid or top panel. Note how each hose connects, and photograph the clamps and the way they face. Swap the distributor across, push the hoses fully onto their spigots and refit the clamps in the same positions. Turn the taps on and run a short fill to check for leaks.

Questions about this part

My washer only has a cold water hose. Will it suit?

The dual and single tag suggests it's made for machines with either valve setup, but that isn't confirmed for every model. Match 140202208033 with the number on your old distributor, or send us your model and product number to check.