140194749010 Genuine 160mm Enamelled Spill Bowl for Electrolux Group Electric Cooktops and Cookers, Coil Hotplate Drip Bowl

Small hotplates need a small bowl, and 140194749010 is the genuine Electrolux group 160mm enamelled spillage bowl. It sits under a coil hotplate to catch drips and reflect heat back up to the pan. The record tags it NZ, so it may come from the New Zealand range, which makes matching the diameter and part number especially important. A 200mm version is listed separately as 140194748012.

Why replace a spill bowl under the hotplate

Spill bowls catch anything that boils over before it can run into the cooktop or onto the wiring under the hotplate. They also help direct heat upward. After years of burnt-on food, the enamel can chip and rust, the bowl can warp, and stubborn stains can start to smoke and smell every time the plate heats up. A damaged bowl may also sit unevenly, letting the coil element tilt so pans don't sit flat. Fresh bowls keep spills contained and make the cooktop easier to keep clean.

Part details

• Genuine Electrolux group part number 140194749010
• Enamelled spillage bowl
• 160mm diameter
• NZ tag on the part description
• 200mm version is 140194748012

Fitting the new spill bowl

Switch the cooktop off at the circuit breaker and let the hotplate cool completely. Lift or unplug the coil element as your user manual describes, without pulling on the wiring, and take out the old bowl. Drop the new bowl in so it sits flat, refit the element so it's level, then restore power and check the plate heats.

Questions about this part

How do I measure my spill bowl?

Measure straight across the top of the old bowl, edge to edge. This one is listed at 160mm diameter, which suits the smaller hotplates. Larger plates usually need the 200mm bowl, part number 140194748012.