140182713127 Genuine 900mm Hob Top, Laser Etched, for Electrolux Group Cooktops and Cookers A18271312

Part 140182713127 is a genuine Electrolux group hob top for a 900mm cooking surface, with laser etched markings. It is also referenced as A18271312. The top is the main visible panel of the hob, so a new one makes a tired or damaged cooktop look right again. Electrolux has more than one 900mm top in its range, so make sure the code on your old top or parts list matches before ordering.

When a 900mm cooktop top needs replacing

The hob top is the panel that covers the cooktop body, frames the burners or cooking zones and carries the etched markings. Laser etching puts those markings into the surface itself rather than printing them on, so they hold up to cleaning. Owners usually replace the top after a heavy pot leaves a dent, a spill gets baked into the finish, or harsh scourers leave deep scratches. It is also worth replacing if the top has warped or bent so the burner parts no longer sit level, which can make the flames burn unevenly.

Part details

• Genuine Electrolux part 140182713127
• Also listed as A18271312
• Top for a 900mm hob
• Laser etched markings

Swapping the hob top

On a gas hob, turn off the gas at the isolation valve and switch off power to the ignition at the wall. Lift off the trivets, burner caps and heads, then pull off the knobs. How the top is held down varies from model to model, so note every screw and clip as you go. Gas connections should only be disturbed by a licensed gas fitter.

Questions about this part

Does this top come with burners, knobs or trivets?

The part is described as the hob top only, so plan to reuse your existing burner parts, knobs and trivets. If any of those are damaged as well, order them separately using the parts list for your cooktop model.