140180051041 Genuine Dishwasher Drain Pump for AEG, Electrolux Dishwashers ESF8735ROX ESF8735RKX FEE92800PM FFE73600PM

Water sitting in the bottom after a cycle often points to the drain pump. This genuine AEG and Electrolux pump, part 140180051041, is listed for the ESF8735ROX and ESF8735RKX, plus the FEE92800PM and FFE73600PM. Related numbers include 140180051033, 140000604011, 140000604045 and 140048525046. It's a 3 phase pump rated 110-140V, 50Hz and 35W, run by the dishwasher's own electronics.

Dishwasher not draining? Signs of a failed drain pump

At the end of each wash and rinse, the drain pump pushes the dirty water out through the drain hose. If it fails, water stays in the sump, the cycle may stop with a drain error, and dishes come out sitting in murky water. A pump that's partly jammed by broken glass, seeds or labels may hum, rattle or drain slowly. Before replacing it, clean the filter and check the drain hose isn't kinked or blocked, as both give the same symptoms. If the impeller turns freely and the hose is clear but nothing pumps out, the pump is a likely cause.

Part details

• Genuine Electrolux group part 140180051041
• Related numbers 140180051033, 140000604011, 140000604045 and 140048525046
• 3 phase drain pump rated 110-140V, 50Hz, 35W
• Listed for AEG and Electrolux ESF8735ROX, ESF8735RKX, FEE92800PM and FFE73600PM

Replacing the drain pump

Switch off at the wall, turn off the water and sponge out the water in the base. The pump is reached from underneath or behind the kickplate, depending on the model. Take a photo of the plug and hose positions first. Don't try to test this pump on mains power, as it's rated 110-140V and is meant to be driven by the dishwasher's control board.

Questions about this part

Why is a dishwasher pump rated 110-140V?

This is a 3 phase pump that the dishwasher's electronics power and control, so it isn't wired straight to the 240V supply. That's normal for this design. Just never connect it directly to mains power for testing.