140136330028 Genuine Door Bellows Clamp with Spring for Electrolux Group Front Load Washing Machines

Front loader leaking at the door after the seal came loose? 140136330028 is the genuine Electrolux group bellows clamp with spring, the band that holds the rubber door boot in place. It's sold as the clamp only. Clamps come in different diameters, so compare it with your old one, or check your model number with us if there's any doubt about the fit.

Front loader leaking from the door seal? Check the bellows clamp

The bellows, or door boot, is the rubber seal between the drum opening and the front of the cabinet. A spring-tensioned clamp wraps around its lip and pulls it tight into a groove so water can't escape. If the spring stretches, rusts or snaps, the seal can pop out of place, often after a heavy spin or when bulky items drag on it. You'll see water pooling under the front of the machine, a seal that sits loose or crooked, or a clamp hanging inside the door area.

Part details

• Genuine Electrolux group part 140136330028
• Spring-tensioned clamp for the door bellows
• Holds the door seal lip in its groove
• For front load washing machines

Fitting a bellows clamp

Unplug the washer and turn the taps off. Open the door, peel back the seal lip and check the bellows itself for tears, since a split seal will still leak with a new clamp. Hook one end of the spring, stretch the clamp around the groove and work it into place with a flat blade screwdriver. Run a short rinse cycle and check for drips.

Questions about this part

Is the rubber door seal included?

No, 140136330028 is the clamp and spring only. If your bellows is torn, perished or covered in mould spots that won't clean off, replace it at the same time, since you'll already have the clamp off.