140123198016 Genuine Middle Drawer Magnetic Seal S2 for Electrolux Group Fridge Freezers, Drawer Door Gasket Replacement

On fridges with a middle drawer, the drawer front needs its own seal, and this genuine Electrolux group magnetic seal, part 140123198016, is made for that position. It's catalogued as the S2 version. Seals for the main doors, the freezer drawer and the middle drawer each have their own numbers, so match the position and part number rather than going by colour or shape alone.

Fridge drawer not sealing properly?

The magnetic strip inside the seal pulls the drawer front against the cabinet so cold air stays in and warm, moist air stays out. When the seal hardens, tears or loses its shape, the drawer can sit slightly open even when pushed shut. You'll often see frost or ice inside the drawer, water droplets or sweating along the drawer front, food spoiling faster, or the compressor running longer than normal. Wipe the seal with warm soapy water first, as built-up grime can stop it sitting flat.

Part details

• Genuine Electrolux group part 140123198016
• Magnetic seal for the middle drawer
• S2 version
• Middle drawer seal only, door and freezer drawer seals are different parts

Changing the drawer seal

Turn the fridge off at the wall and move the food from the drawer into an esky. Open the drawer fully and check whether the seal pushes into a groove or sits under a retaining edge. Peel the old one away from a corner. If the new seal is creased from packing, soak it in warm water or warm it gently with a hair dryer so it straightens before you press it in.

Questions about this part

What does S2 mean?

S2 is part of the Electrolux description for this seal and identifies the version. We can't decode it further, so match 140123198016 against your parts list, or send your fridge's model and PNC, usually on a label inside the fresh food section, through the parts enquiry form.