140119689069 Genuine AutoDose Motor Module POT FN for Electrolux Group Washing Machines, Detergent Dosing Motor

Washing machines with AutoDose hold detergent in a built-in reservoir and measure out the dose for each load. Part 140119689069 is the genuine Electrolux group motor module for that system, catalogued as the POT FN version. If your machine has stopped dosing, or shows a dosing error, this module is one of the main suspects. Match the number on your old module to 140119689069 before ordering, as no model list is on file.

Washing machine not dispensing detergent automatically?

On an AutoDose machine, the motor module drives the pump or mechanism that draws detergent or softener from the reservoir and sends it into the wash at the right time. When it fails, loads come out poorly washed or rinsed, the reservoir level stays the same from wash to wash, or the machine shows a dosing fault. Before replacing the module, check the reservoir isn't empty, that thick or old detergent hasn't set in the lines, and that the drawer is fully seated. A clogged path can stall a healthy motor.

Part details

• Genuine Electrolux group part 140119689069
• Motor module for the AutoDose detergent dosing system
• POT FN version
• For Electrolux group washing machines with AutoDose

Replacing the AutoDose motor module

Switch the washer off at the wall and unplug it. Remove the detergent drawer and empty the reservoirs, or drain them if your machine has drain plugs, to avoid spills. Note the hose and wiring routes with a photo before removing the old module. Once the new one is in, refill with a suitable liquid detergent and run a short program to confirm it doses.

Questions about this part

Does the AutoDose system need a special detergent?

AutoDose systems are made for liquid detergent and liquid softener. Powders and very thick or gel products can clog the dosing path and overwork the motor. Check your user manual for the products and settings Electrolux recommends for your model.