140101088015 Genuine 200mm Cooktop Element with NZ Backer for Electrolux Group Electric Cooktops, Replacement Hotplate Element

Genuine Electrolux part 140101088015 is a 200mm cooktop element in the version Electrolux describes as having the NZ backer. It's a separate part number from the standard 200mm element, so order the version that matches your cooktop. Look at the back and terminal end of your old element, compare it with 140101088015, and check your cooktop's model and product number before ordering.

Electric cooktop element not heating

A cooktop element that stays cold, heats only in patches, glows unevenly or trips the safety switch when turned on has usually failed. Visible blistering, a split in the sheath or burnt terminals confirm it. Before replacing the element, check the control switch for that hotplate, since a faulty switch or energy regulator can produce the same symptoms and is a common culprit. A resistance test across the element terminals, with the power isolated, separates the two quickly.

Part details

• Genuine Electrolux part 140101088015
• 200mm cooktop element
• NZ backer version
• Separate part to the standard 200mm element

Fitting the element

Isolate the cooktop at the switchboard and let it cool fully. Cooktops are normally hard-wired, so have a licensed electrician carry out the replacement. Note how the element sits and connects before removing it, check the terminals and wiring for heat damage, and make sure the new element sits level before testing it on each setting.

Questions about this part

What's the difference between this and the standard 200mm element?

Electrolux lists this as the NZ backer version and gives it its own number. The standard 200mm element is a different part, so match the number and the back of your old element before choosing which one to order.