140026158075 Genuine Door Lock for Electrolux, Westinghouse, Simpson, AEG Front Load Washing Machines, Replaces 8084553034 A02615807

Part 140026158075 is a genuine Electrolux door lock for front load washing machines sold under the Electrolux, Westinghouse, Simpson and AEG names. The same lock is catalogued as 8084553034, 8084553018, 8084553067 and A02615807, so if your old lock or parts list shows any of those, this is the match. It holds the door shut during a cycle and tells the controller it's safe to fill and spin.

Front loader won't start or door stays locked? Signs of a faulty door lock

Before a front loader will fill, the door lock has to latch the door and send a closed signal back to the control board. At the end of the cycle it lets go again once the drum has stopped and it's safe to open. A worn or failed lock can leave the machine refusing to start, showing a door error, stopping mid-cycle, or keeping the door locked long after the wash has finished. A broken door catch can cause similar problems, so check the catch on the door itself while you're there.

Part details

• Genuine Electrolux part number 140026158075
• Also catalogued as 8084553034, 8084553018, 8084553067 and A02615807
• Also listed as 808455303
• Front load washing machine door interlock
• For Electrolux, Westinghouse, Simpson and AEG front loaders

Changing a front loader door lock

Unplug the washer and make sure the drum is empty. On most front loaders you'll need to ease off the door boot clamp and fold the seal back to reach the lock's fixing screws. Photograph the plug before unclipping it, fit the new lock, then refit the boot clamp carefully so the seal can't leak. Run a short program to test.

Questions about this part

My old lock says 8084553034. Is this the same part?

Yes. 8084553034 is one of the numbers this door lock is catalogued under, along with 140026158075, 8084553018, 8084553067 and A02615807. Check your washer's model plate as well before you order.