140014525152 Genuine Inverter Drive Board for Embraco FMXY6C Compressors in Electrolux Group Fridges

140014525152 is a genuine Electrolux drive board matched to the Embraco FMXY6C compressor fitted to some Electrolux group fridges. Variable speed compressors like this don't run straight off mains power. The drive board, often called an inverter board, takes power and a speed signal and runs the compressor motor at the speed needed. The board must suit your compressor, so read the label on the compressor before ordering.

Fridge compressor not starting? Check the inverter drive board

If the drive board fails, the compressor stops even though the rest of the fridge seems normal. Lights, fans and the display may all be working while the cabinet slowly warms up. Some fridges show a fault code, and some drive boards have a diagnostic light that flashes. You may hear the compressor try to start and stop, or nothing at all. Burnt components, a cracked solder joint or water damage on the board point to it, but a seized compressor or a main board fault can look similar, so test before you replace.

Part details

• Genuine Electrolux part 140014525152
• Compressor inverter drive board (PCBA)
• Matched to the Embraco FMXY6C compressor
• For Electrolux group fridges

Fitting the drive board

Unplug the fridge and wait a few minutes, as drive boards can hold a charge. The board is usually mounted on or next to the compressor at the back. Photograph the connections, move them across one at a time and refit any cover so the board stays dry. Fitting is a job for a qualified refrigeration or appliance technician.

Questions about this part

How do I know which compressor my fridge has?

Look at the label on the compressor at the back of the fridge, low down behind the rear cover. It shows the Embraco model. This board suits the FMXY6C, and other Embraco drive boards are listed for different compressors.