140011410085 Genuine Drain Hose for Electrolux Group Dishwashers, A-WHS Series Outlet Hose

140011410085 is a genuine Electrolux drain hose for dishwashers in the A-WHS series. It's the outlet hose that carries waste water from the drain pump to your sink trap or standpipe. Hose length, end fittings and routing differ between dishwasher ranges, and there's no model list on file for this one, so confirm the number against your machine's parts list.

Dishwasher leaking or not draining? Check the drain hose

Every time the dishwasher pumps out, dirty water runs through this hose under pressure. Over the years a hose can split near the pump connection, crack where it bends under the sink, or get kinked or squashed when the machine is pushed back into its cavity. Food scraps and grease can also build up inside and partly block it. You might notice water pooling under the dishwasher or in the cupboard next to it, dirty water left in the base after a cycle, a drain error code or a gurgling noise as it tries to empty.

Part details

• Genuine Electrolux part 140011410085
• Dishwasher drain (outlet) hose
• A-WHS series dishwashers
• Confirm length and fittings by model and PNC

Changing the drain hose

Switch off at the wall and turn off the tap before you pull the dishwasher out. Keep a towel and a shallow tray handy, as water will drain from the old hose. Route the new hose along the same path without kinks, keep a high loop if your installation had one, and secure it to the waste outlet with a clamp. Run a rinse cycle and check for drips.

Questions about this part

Where is the model number on my dishwasher?

Open the door and look along the side or top edge of the inner door for a sticker. It shows the model number and the PNC. Those let us check whether 140011410085 matches your machine before you order.