140010140162 Genuine Switch Harness A01014016 for Electrolux Group Gas Cooktops, Burner Ignition Switches

Genuine switch harness 140010140162, also known by the older Electrolux number A01014016, is used on gas cooking appliances from the Electrolux group. It carries the ignition switches that sit behind the control knobs. The burner count and model list aren't confirmed for this number, and similar harnesses are made in 4 and 5 switch versions, so check your parts list or the old harness first.

Ignition faults that point to the switch harness

When you press and turn a gas knob, a switch on that valve closes and the spark generator starts clicking until you let go. With the harness working, only the burner you're lighting should trigger the spark. If one switch sticks or gets wet, the igniters may click on their own, refuse to stop, or not fire at all. Grease and boil-overs that seep under the knobs are a regular culprit. Other clues are a burnt smell near the controls, cracked switch bodies or brittle wiring. Rule out a damp cooktop and dirty igniter tips before replacing the harness.

Part details

• Genuine Electrolux part 140010140162
• Older Electrolux number A01014016
• Ignition switch harness for gas cooking appliances
• Switch count not confirmed, match the number before ordering

Before you replace the harness

Isolate the power and turn off the gas at the appliance's isolation valve first. Work on a harness that connects to mains on a gas appliance must be done by a licensed gas fitter or electrician. Label each switch to its valve, follow the original wire route away from burner heat, and check every burner sparks only when its own knob is turned.

Questions about this part

Is A01014016 the same part?

Yes. A01014016 is the older Electrolux number linked to 140010140162, so a harness or parts list showing either number points to this part. Check your model and PNC as well to be sure it matches your cooktop.