140002240020 Genuine BLDC Circulation Pump 90W for Electrolux Group Dishwashers, Brushless DC Wash Pump

Part 140002240020 is a genuine Electrolux circulation pump with a 90W brushless DC (BLDC) motor. In a dishwasher, the circulation pump is the main wash pump, pushing water up to the spray arms throughout the program. Brushless pumps are driven by the machine's control electronics, so it's important to replace one with the exact version your model uses. Check 140002240020 against your parts list or the label on the old pump.

Dishwasher not washing properly

When the circulation pump weakens or stops, water sits in the base and the spray arms barely turn. Dishes come out dirty with food still stuck on, and the machine may sound unusually quiet during the wash, or hum and buzz without moving water. A BLDC pump fault can also bring up an error code, since the control monitors the motor. Before blaming the pump, clean the filters and sump, check the spray arms spin freely, and look for broken glass or debris jammed in the impeller.

Part details

• Genuine Electrolux part 140002240020
• Dishwasher circulation (wash) pump
• 90W brushless DC motor
• Factory replacement for Electrolux group dishwashers

Swapping the circulation pump

Unplug the dishwasher, turn off the water and empty the sump before tipping or laying the machine back. Photograph the hose clamps, seals and wiring plugs, then remove the old pump. Fit new seals where supplied, make sure the pump locks fully into the sump, and check underneath for leaks during the first program.

Questions about this part

Can I fit a cheaper non-BLDC pump instead?

No. A brushless pump is driven by the dishwasher's electronics in a particular way, and a different motor type is unlikely to work with the control. Stick with 140002240020 or the number your model's parts list gives.