140001158025 Genuine Dishwasher Fill Valve 2.5L/min 180 Degree Outlet for Electrolux Group Dishwashers, Also 4055361234

This genuine Electrolux fill valve, part 140001158025, controls the water coming into the dishwasher. It's rated at 2.5 litres per minute and has a 180 degree outlet, details worth comparing with your old valve as flow rates and outlet angles vary between versions. The number is cross referenced to the earlier Electrolux dishwasher inlet valve 4055361234.

Dishwasher not filling or filling too slowly

The fill valve is an electrically operated tap. When the control powers its coil, the valve opens and lets mains water through at a set flow rate. If the coil burns out, the dishwasher hums and shows a no water or fill error even with the tap fully on. A blocked inlet screen causes slow filling, while a valve that won't close properly keeps trickling water in, which can flood the base and set off the anti-flood protection on machines that have it. A resistance check across the coil terminals helps confirm a dead valve.

Part details

• Genuine Electrolux part 140001158025
• Dishwasher inlet fill valve
• 2.5 L/min flow rate
• 180 degree outlet
• Cross references 4055361234

Replacing the fill valve

Turn off the tap and unplug the dishwasher, then disconnect the inlet hose and catch any water left in it. Note the wire positions on the coil terminals and which way the outlet faces before removing the old valve. Fit the new valve, reconnect the hose with its washer in place, and check for leaks as the machine fills on a test program.

Questions about this part

Is 140001158025 the same as 4055361234?

It's cross referenced to 4055361234, the earlier Electrolux number for a 2.5 L/min dishwasher inlet valve. Compare the flow rate and outlet direction shown on your old valve, and check your model with us if anything looks different.