140000443295 Genuine Drain Pump 30W 220-240V 50Hz for Electrolux Dishwashers, Dishwasher Waste Water Pump

This 30W drain pump, part 140000443295, is a genuine Electrolux replacement rated for 220-240V at 50Hz. It pumps dirty water out of the dishwasher sump and into your drain hose at the end of each wash and rinse. We don't hold a model list for 140000443295, so check the part number on your old pump or the parts diagram for your dishwasher.

Dishwasher not draining? Check the drain pump

If you open the door after a cycle and find dirty water sitting in the bottom, the drain pump is high on the list of suspects. Other signs include a drain fault code, loud buzzing or grinding during the pump out, or a cycle that stalls part way through. Before replacing the pump, clean the filters, check the drain hose isn't kinked or blocked, and make sure the sink spigot or air gap is clear. Then look at the pump impeller for broken glass, fruit seeds or labels. If the impeller is clear and the pump hums or does nothing, it's time for a new one.

Part details

• Genuine Electrolux part 140000443295
• Dishwasher drain pump
• 30W
• 220-240V, 50Hz
• Dishwasher models not on file

Swapping the drain pump

Turn the dishwasher off at the wall and close the tap. Bail out water from the sump and remove the filters. Tilt the machine back or remove the base cover to reach the pump, keeping a towel handy for spills. Note the plug and how the pump twists or clips into the sump. Fit the new pump with its seal seated properly, then run a rinse and drain to check.

Questions about this part

Can I test the drain pump myself?

You can check the impeller turns freely and isn't jammed. With the power isolated, a multimeter across the pump terminals will show whether the winding is open. If you're not confident with electrical testing, ask a repairer to check it.